|
Technology Transfer
Services’ enrollment classes are interactive
seminars led by our experienced seminar
leaders. These seminars give the participants
the ability to engage in group discussions that
allow them to become more valuable assets for
your facility.
Fall/Winter
2008 Schedule
September
9/2-9/5
PLCs: This 3.5 day
course provides participants with an
introduction and basic working knowledge of PLCs.
This course is designed not for those personnel
directly responsible for maintaining PLCs, but
those workers whose equipment is controlled by
them and who must troubleshoot that equipment.
$1695
9/24-9/26
SAP Workshop: This 2.5
day course designed for end-users in the
maintenance reliability field. It will give the
participant working knowledge of entering work
orders, maintenance requests, planning and
scheduling, and tracking maintenance costs.
$1395
October
10/1-10/3
Heat Rate - Optimizing Your
Power Plant: This 2.5 day class covers the
fundamentals of heat rate and the impact of
changing heat rate on operating cost. This will
include an overview of heat rate concepts,
controllable and non-controllable losses, and
the effects of component performance on
operating cost. $1395
10/6-10/10 Basic Electrical: This
5 day course begins with a review of electrical
safety topics followed by what substation
equipment is and the description of 480V
switchgear and 4.16 kV equipment. $1795
10/13-10/17 Advanced Electrical: This
5 day course begins with a review of electrical
safety topics followed by explanations of
grounding principles, applications, and test
equipment. $1795
10/15-10/17 Total Process Reliability -
Improving Uptime: This 2.5 day course
explains in detail a process to reduce
maintenance cost and increase uptime by engaging
operations in asset management. $1395
10/20-10/24 Basic I&C: This 5 day
course begins with a review of process
measurement fundamentals followed by a review of
the measurement means: pressure, temperature,
flow, and level. $1795
10/21-10/24 Combined Cycle Power Plant
Operations: This 3.5 day course includes
system descriptions and flow paths of a combined
cycle plant, the sequence of major events during
a plant start-up and shut-down and various
industry trends in the combined cycle power
plant. $1695
10/27-10/31 Advanced I&C: This 5 day
course begins with a review of process
measurement fundamentals followed by a review of
the process control systems, and finishes with
the fundamentals of calibration and PLC. $1795
November
11/5-11/7 Leading the Maintenance
Operation in the 21st Century: This 2.5 day
class informs participants what the 21st
century maintenance leader needs to know to be
effective. $1395
December
12/3-12/5
SAP Workshop: This 2.5
day course designed for end-users in the
maintenance reliability field. It will give the
participant working knowledge of entering work
orders, maintenance requests, planning and
scheduling, and tracking maintenance costs.
$1395
12/9-12/12 PLCs: This 3.5 day
course provides participants with an
introduction and basic working knowledge of PLCs.
This course is designed not for those personnel
directly responsible for maintaining PLCs, but
those workers whose equipment is controlled by
them and who must troubleshoot that equipment.
$1695
Substitution
or Cancellation
Cancellations made 10
business days prior to seminar date will receive
a full refund. Substitutions can be made at any
time. Cancellations made less than 10 business
days will be issued a credit memo good for two
years. Registered attendees who fail to show up
or have not given proper notice of cancellation
will not receive refund or credit. |
