March Employee Anniversaries

2014-03-10T15:50:33-04:00

We just wanted to let you know that your efforts at TTS do not go unnoticed. You’re all a necessary piece to this puzzle. We appreciate your dedication and service, and we know others do too. Celebrating anniversaries this month include: Dan Andrews – 15 years on 3/01 George Gruber – 1 year on 3/08 Ken [...]

March Employee Anniversaries2014-03-10T15:50:33-04:00

Transmitter Calibration

2014-12-31T11:04:57-05:00

In today’s environment of shrinking cost margins and increased regulations, maintaining properly calibrated equipment becomes ever important. Even the smallest inaccuracy in process measurements can cause a significant loss in revenue, especially if the process handles large volumes. Electronic equipment can lose accuracy over a period of time, leading to incorrect readings; this is where [...]

Transmitter Calibration2014-12-31T11:04:57-05:00

Maintenance Excellence

2014-09-10T14:18:27-04:00

The SAP Plant Maintenance module encompasses the overall scope of maintenance procedures and functions for an organization. The subcomponents of the Plant Maintenance module include preventative […]

Maintenance Excellence2014-09-10T14:18:27-04:00

Process Control Fundamentals

2014-09-10T14:20:24-04:00

Process Control In almost all industrial process applications, control of process variables is critical to the safe and efficient operation of the process. The most common variables controlled are pressure, level, temperature, and flow. Even though there are many different methods used to control these processes, this monitoring and control is generically called process control. [...]

Process Control Fundamentals2014-09-10T14:20:24-04:00

Introduction to Welding

2014-12-31T11:00:17-05:00

Welding is a common process for joining metals using a large variety of applications. Welding occurs in several locations, from outdoors settings on rural farms and construction sites to inside locations, such as factories and job shops. Welding processes are fairly simple to understand, and basic techniques can be learned quickly.Welding is the joining of [...]

Introduction to Welding2014-12-31T11:00:17-05:00

Oil and Grease Application Methods

2014-09-10T14:42:37-04:00

Many different methods are used to apply oils and greases to machinery. These methods range from a simple oil can, used to physically apply oil to rotating machinery at predetermined intervals, to large, […]

Oil and Grease Application Methods2014-09-10T14:42:37-04:00

Sampling and Testing

2014-09-10T14:44:24-04:00

Proper machinery lubrication requires a clean, effective supply of lubricating oil. Oil can become full of wear products, become contaminated by water or chemicals, or otherwise lose the properties it was chosen […]

Sampling and Testing2014-09-10T14:44:24-04:00

2014 Houston Open Enrollment Training

2014-09-10T14:45:46-04:00

Technology Transfer Services is pleased to announce our complete list of dates for open enrollment training in 2014 at our Houston training facility. For additional information, contact sales@techtransfer.com. Month Date Topic April 22nd – 24th Planning and Scheduling July 15th – 17th Hands on Process Instruments for Engineers September 23rd – 25th Combined Cycle Heat Rate October [...]

2014 Houston Open Enrollment Training2014-09-10T14:45:46-04:00
Go to Top