OSHA Electrical Hazard Assessments

2014-09-09T14:02:57-04:00

The Occupational Safety and Health Administration, or OSHA, regulates workplace safety by setting and enforcing standards and by providing training, outreach, education, and assistance. OSHA officially formed on April 28, 1971, the date that the OSH Act became operative. The Occupational Safety and Health Act allows OSHA to issue workplace health and safety regulations. These [...]

OSHA Electrical Hazard Assessments2014-09-09T14:02:57-04:00

August Employee Anniversaries

2014-09-08T12:43:56-04:00

We just wanted to let you know that your efforts at TTS do not go unnoticed. You’re all a necessary piece to this puzzle. We appreciate your dedication and service, and we know others do too. Celebrating anniversaries this month include: Doug Fryar  – 6 years on 8/05 John Sams –15 years on 8/09 Tony Holguin [...]

August Employee Anniversaries2014-09-08T12:43:56-04:00

Electrical Safety in the Workplace

2014-09-08T12:50:47-04:00

According to the National Institute of Occupational Safety & Health (NIOSH), electrical hazards cause more than 300 deaths and 4,000 injuries in the workplace each year. Electrical accidents are ranked 6th among all causes of work related deaths in the United States. Always work safely, wearing the proper PPE for your situation and know what [...]

Electrical Safety in the Workplace2014-09-08T12:50:47-04:00

Control and Anticipate Changes

2014-09-09T14:04:45-04:00

A PID controller combines the proportional response to a change while eliminating the offset error.  It anticipates changes by measuring the initial rate of change for accurate control. Setting up a PID controller or tuning to a process loop is a little more involved than simpler controllers. Proportional plus reset plus rate controllers combine proportional [...]

Control and Anticipate Changes2014-09-09T14:04:45-04:00

Proportional Control Basics

2014-09-09T14:08:27-04:00

There is a high demand for qualified Automatic Control Systems Engineers in industry.  Say that there is no automatic control, then there will be no heating or air-conditioning in the way that we have become used to; whereas certain temperature and humidity levels are maintained. Refrigerators and stoves would not be able to regulate their [...]

Proportional Control Basics2014-09-09T14:08:27-04:00

TTS Selected by TrainingIndustry.com as One of the Top 20 Workforce Development Companies

2014-09-09T12:59:15-04:00

Training Industry, Inc. Contact Lea Johnson, Market Research Manager 919.653.4997 ljohnson@trainingindustry.com FOR IMMEDIATE RELEASE TrainingIndustry.com Announces Top 20 Workforce Development Companies List CARY, NC, July 10, 2014 – TrainingIndustry.com has announced its Top 20 Workforce Development Companies List, as part of its mission to continually monitor the training marketplace for the best providers of training [...]

TTS Selected by TrainingIndustry.com as One of the Top 20 Workforce Development Companies2014-09-09T12:59:15-04:00

Control Systems Are All Around Us

2014-09-10T11:58:55-04:00

Control systems are all around us. When we drive a car, take milk out of the refrigerator, or turn on the heat, we are using automatic control systems. Technicians who can troubleshoot and repair these systems are in high demand. Principles of Control Systems Control systems integrate elements whose function is to maintain a process [...]

Control Systems Are All Around Us2014-09-10T11:58:55-04:00

July Employee Anniversaries

2014-07-09T07:23:09-04:00

We just wanted to let you know that your efforts at TTS do not go unnoticed. You’re all a necessary piece to this puzzle. We appreciate your dedication and service, and we know others do too. Celebrating anniversaries this month include: Ken Frazier  – 20 years on 7/01 Adrian Swift –1 year on 7/08 Christina Clark – [...]

July Employee Anniversaries2014-07-09T07:23:09-04:00

The Basics of Process Control Diagrams

2014-09-10T12:08:03-04:00

Process Control Technicians are in high demand in industry.  As automation continues to advance our capabilities, it also increases the difficulty of maintaining the system.  Understanding the complex systems in […]

The Basics of Process Control Diagrams2014-09-10T12:08:03-04:00
Go to Top